For this turnaround project, MACH10 was asked to perform the role of inspector on the client’s team during the hot-gas path inspection of the GE Frame 7E gas turbines driving the propane compressor. In the course of the project, the consultants were required to oversee and...
As part of the Work Force Skills Enhancement services, MACH10 provides Customized Training and Coaching programs about Rotating Equipment and RAM Analysis. Courses are presented by senior trainers with more than 30 yrs of experience in design and operating, and are composed by theoretical sessions,...
[vc_row][vc_column width='1/2'] Running an unmanned asset in a remote area of the Amazon rainforest is a challenging endeavour, even when the asset design has been simplified and is well-proven. Despite the difficulties, MACH10 performed a Reliability, Availability, and Maintainability (RAM) analysis of a new production facility,...
[vc_row][vc_column width='1/2'] Compressor trains and their drivers lie at the heart of LNG processes. Our consultant’s knowledge and operating experience of LNG facilities onshore and offshore (FLNG) cover every aspect of drivers and driven equipment, solutions to on-going problems and the cutting-edge technology that is progressing...
[vc_row][vc_column width='1/2'] Our Customer conducted a Plant Integrity, Reliability and Remaining Life study for its LNG plant. The study covered high criticality process Rotating Equipment along with Gas Turbine and Steam Turbine generators. The equipment under review, were suspected to be at or close to its end...
[vc_row][vc_column width='1/2'] As part of the design development of a new offshore platform in the North Sea, MACH10 was asked to conduct an integrated Reliability, Availability, and Maintainability (RAM) analysis of the subsea and topside portions of the asset. The task was performed using best-in-class RAM analysis...
[vc_row][vc_column width='1/2'] A Boil Off Gas (BOG) Compressor of Customer LNG plant tripped because of excessive rotor movement. This event occurred after 18 months of operating; when the expected life to inspection had been thought to be 6 years. The impact of this breakdown was the...
[vc_row][vc_column width='1/2'] A UK upstream operator with assets in the North Sea was concerned about the performance degradation of one of its Gas Lift Compressor and about the capability of the machine to contribute to the platform’s oil production. MACH10 has been asked to review the...
[vc_row][vc_column width='1/2'] An upstream operator in the Middle East was in the process of revamping a mature oil production installation in a project worth over $10 billion. The field was producing oil and associated sour gas with extreme H2S fraction, high water and chlorine content. The production...
[vc_row][vc_column width='1/2'] Our client, an FPSO operator in West Africa, had been struggling with problems plaguing the Gas Turbine Generators (GTG) on its FPSO for several years. Problems included process upsets cascading down to gas turbine generators trips and total power loss, power system instability causing frequent...
